Mountfield 1636H Specifications download pdf (Page 10)

with the hole on the shaft and insert the pin (3) using a hammer. Make sure the end

comes right through to the opposite side.

To avoid damage to the steering wheel, use a punch or a screw-

driver of the same size as the pin when hammering it through the hole.

3.3 FITTING THE SEAT

Mount the seat (1) on the plate (2) using the

screws (3).

3.4 MOUNTING THE FRONT BUMPER (if

provided)

Mount the front bumper (1) on the bottom of

the frame (2) using the four screws (3).

3.5 ACTIVATING AND CONNECTING THE BATTERY

The battery (1) is housed behind the engine

and secured with an elastic tie-rod (2).

Battery acid is cor-

rosive and polluting. Wear protective

gloves and goggles when handling the



WARNING!



➤

Acid battery:

NOTE

UNPACKING AND ASSEMBLY

3 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

Mountfield 1636H Specifications Page 10