Mountfield 1636H Specifications download pdf (Page 11)

battery and dispose of the battery

in accordance with the regula-

tions in force.

Unfasten the elastic tie rod (2) and

remove the battery and the guard

(3).

Pour the electrolytic solution (4) (acid not supplied: specific

weight 1.280 or 31.5° Baumé) up to the indicated level, dis-

tributing it evenly among the six cells.

Close the six caps (5) supplied and charge the battery.

Put the battery back on the machine. The elastic tie-rod (2)

should be positioned behind the battery filler caps (5).

After activating the battery, always charge the battery com-

pletely with the help of your dealer, who will have all the right equipment. The battery

charger is NOT able to charge the battery for the first time after activation.

First connect the red wire (6) to the positive

pole (+) and then the black wire (7) to the neg-

ative pole (–), using the screws supplied as

shown.

Apply silicone grease to the terminals and

check that the protective cap for the red wire

(6) is in place.

To prevent the safety device in the electronic circuit board from

cutting in, never start the engine until the battery is fully charged!

IMPORTANT

UNPACKING AND ASSEMBLY

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Mountfield 1636H Specifications Page 11